[Milsurplus] Power Connecter wanted, clarification

[Tom Norris]

I had hoped that "older,""GRC" and "front panel
power connector" would have been in the ballpark,
but it apparently wasn't specific enough.

I am looking for the front panel power connector
as used with the T-195 and the mod and demods
for the GRC-19, GRC-106 bits, The power in for
the PP-109, PP112, vehicular adaptors for the
PRC-8/9/10, AC in to the R-390, R-389, GRR-5
and so on.

The 'Older stuff" that I'm referring to has this
power connector on either the front or the rear
panels - 4 male pins with a female threaded insert
in the center. The orientation of the alignment
key is the same on all the gear listed above AFAIK,
I've had all the above at one time, still have a few
bits of it.

I need both this connector and the nut that
holds it in place. If I need to take a whole
junked panel I'll do that.

Thanks for any help. I apologize for the tone.



Tom Norris