[Milsurplus] Prototypes

jay_coward at agilent.com jay_coward at agilent.com
Fri Sep 3 14:24:12 EDT 2004


Yes! ARC-3 does have A,R,C. type connectors.I still think its for bench test...
 Jay

-----Original Message-----
From: milsurplus-bounces at mailman.qth.net
[mailto:milsurplus-bounces at mailman.qth.net]On Behalf Of Mike Hanz
Sent: Friday, September 03, 2004 10:14 AM
To: Jack Antonio
Cc: milsurplus at mailman.qth.net
Subject: Re: [Milsurplus] Prototypes


The two big ones are both 12 pin transmitter connectors - one from the 
274N series with the triangular configuration in the center pins, and 
one from the ARC-5 modulator connector, with the rectangular 
configuration on the four pins near the center.  Not much help there.  
The smaller one is 8 pin, like the receiver rack connector to the 
control boxes.

You're gonna force me to open it up and take a picture, aren't you?  :-)

Mike

Jack Antonio wrote:

>Hey Mike
>
>Just out of curiosity, what connectors mate
>with the "ARC-5" connectors on the box?   Wonder if
>that would give us a clue as to the intended use of
>it?
>
>Jack
>
>----- Original Message ----- 
>From: "Mike Hanz" <AAF-Radio-1 at cox.net>
>To: <jay_coward at agilent.com>
>Cc: <milsurplus at mailman.qth.net>
>Sent: Thursday, September 02, 2004 10:57 AM
>Subject: Re: [Milsurplus] Prototypes
>
>
>  
>
>>Possibly, though I would have thought it would have a
>>MX-XA-9/ARM-1(XA-1) suffix on it if that were the case, Jay.  Never got
>>inside it, so can't speculate.  It's not shown in my ARC-3 manual as a
>>part of the ARM-1.
>>
>>jay_coward at agilent.com wrote:
>>
>>    
>>
>>>Hi Mike,
>>>Could this be some sort of bench test box for the ARC-3?  I'll look in
>>>      
>>>
>my manuals tonight.
>  
>
>>>Jay
>>>
>>>-----Original Message-----
>>>From: milsurplus-bounces at mailman.qth.net
>>>Sent: Thursday, September 02, 2004 7:34 AM
>>>Cc: milsurplus at mailman.qth.net
>>>
>>>
>>>I placed a photo of an MX-XA-9/ARC-3(XA-1) at
>>>http://members.cox.net/aaf-radio-4/ARC-3_XA-1_box.jpg.  It's about the
>>>same width as the box on the rear of an AN/ARC-1 rack.  I haven't had
>>>any time to delve into its internals...the plug looks like one from the
>>>VRC series with that coax pin, dunno for sure.  It's a strange mixture
>>>of ARC-5 bits and pieces - there are no ARC-3 parts on it that I can see
>>>externally.
>>>
>>>      
>>>
>>______________________________________________________________
>>Milsurplus mailing list
>>Home: http://mailman.qth.net/mailman/listinfo/milsurplus
>>Help: http://mailman.qth.net/mmfaq.htm
>>Post: mailto:Milsurplus at mailman.qth.net
>>    
>>
>
>
>  
>

______________________________________________________________
Milsurplus mailing list
Home: http://mailman.qth.net/mailman/listinfo/milsurplus
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Milsurplus at mailman.qth.net


More information about the Milsurplus mailing list