[Milsurplus] RE:SCR 245 CABINET

[Thekan, Paul]

John

 If it's the large cabinet that sits on the floor , of say a Dodge command
car , that cabinet is made from steel. I have one and it will house the SCR
245 as well as the SCR 193. There was also another smaller cabinet that I've
seen a photo of that housed vertically just the BC 223 on the top and the BC
312 on the bottom and if my memory serves me correctly , that enclosure
looked like it was made from wood. 

Paul
N6FEG

-----Original Message-----
From: milsurplus-bounces at mailman.qth.net
[mailto:milsurplus-bounces at mailman.qth.net] On Behalf Of John McCarty
Sent: Thursday, November 11, 2004 11:27 AM
To: 'milsurplus at mailman.qth.net'
Subject: Re: [Milsurplus] SCR 193 jeep install


 Along the same lines, has anyone ever looked at the mounting for the SCR
245??
Some drawning look like it's a wood cabinet and some pixs look like and open
frame.




								tnx



									John
n9hrt
"Thekan, Paul" wrote:
> 
> 
> 
>   Has anyone out there done a SCR 193-K installation in a jeep? I am going
> to start to purchase the 10 gauge sheet metal to make up the two chests
that
> mount the BC 191 and BC 312 in the jeep and was curious if anyone else has
> tried this and how did it work out.
> 
> 
> 
> Thanks
> 
> Paul
> 
> N6FEG
> 
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
______________________________________________________________
Milsurplus mailing list
Home: http://mailman.qth.net/mailman/listinfo/milsurplus
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Milsurplus at mailman.qth.net