[Milsurplus] 35X032 Dynamotor

[Jack Antonio]

These were the dynamotors for the intercom amplifier
for the TCS. Just happened to fit the "ARC-5" family of
receivers just fine. Swapping the tubes with 6 volt equivalents
and using this dynamotor resulted in a no wiring changes
12 volt receiver.

Jack

Jack Antonio WA7DIA
scr287 at sbcglobal.net


----- Original Message ----- 
From: "David Stinson" <arc5 at ix.netcom.com>
To: "aGEnuine Ham" <gl4d21a at juno.com>
Cc: <milsurplus at mailman.qth.net>
Sent: Friday, July 02, 2004 10:22 AM
Subject: Re: [Milsurplus] 35X032 Dynamotor


> No other markings?  Nameplate doesn't give any other information?
> No nomenclature plate on the base?
>
> aGEnuine Ham wrote:
> > Buried down in the bottom of a box of somethng else (car parts), I
> > discovered a "Radio Dynamotor" 35X032 made for Magnavox by Webster
> > products.  It has the base with 4 slide latches and 3 pin female 'jack'
> > on the bottom and is the size of ARC-5 stuff (274N, it has a Navy
> > inspection stamp), and W221597 stamped just below the anchor in what
> > looks like the same ink.  Nmaeplate sez 14 V at 2.4 A in, 250 V at 60 ma
> > out.
> >
> > What izzit, and what's it worth to anyone?  Haven't tried it, the grease
> > is likely dry anyway.
> >
> > George
> > W5VPQ
> >
> > ________________________________________________________________
> > The best thing to hit the Internet in years - Juno SpeedBand!
> > Surf the Web up to FIVE TIMES FASTER!
> > Only $14.95/ month - visit www.juno.com to sign up today!
> > _______________________________________________
> > Milsurplus mailing list
> > Milsurplus at mailman.qth.net
> > http://mailman.qth.net/mailman/listinfo/milsurplus
> >
>
> _______________________________________________
> Milsurplus mailing list
> Milsurplus at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/milsurplus