[Milsurplus] Type I-70-B Meters HOW HOT ARE THEY!!
Mike Hanz
[email protected]
Thu, 22 Jan 2004 18:16:01 -0500
Well, 'very' hot is a relative term, but I'm glad you checked. The
danger is not in the enclosed instrument, nor even in the uncovered one
- in my demented opinion. The real "whoa, Nelly!" is the stray dust
particle that can be brushed off or blown away from the uncovered meter
face by a breath of air. That can be inhaled and potentially be a big
problem for a person working on the movement. AFAIK, if you keep it
inside its glass and plastic prison, you shouldn't have any worries. A
laminar flow booth or its equivalent would be useful if you need to work
on one.
73,
Mike
[email protected] wrote:
>Greetings All,
>
>
> A week or two ago I posted a message about the I-70-B Tuning Meter. I
>received many responses to it. One did indicate that these meters may be
>very hot( Radioactive ). Well after taking two apart and doing some much
>needed maintenance I was able to measure them with a survey meter. With
>the meter in it's housing the reading was appox 2.0 Mr/Hr, and with the
>meter out of the housing the reading was 40 Mr/Hr. That's a big increase.
>So I went around the shop/shack and checked all the old Military meters,
>most read in the 2 - 3 Mr/Hr range. So if your not sleeping with them up
>against your skin it will be O.K. . I all so found that the front panel
>of a BC-1306 is Hot too, I have had a receiver section mounted in a small
>cabinet siting on the upper shelf of my work bench for a few years now.
>I think I may invest in some thin lead sheeting to cover things up when I
>am not using them, but the lead can be just as bad, Oh well life goes on.
>
>
>
>
>
> Jeff N2LXM
> American
> Patriot
> Amateur Radio Operator
> Proud Father of Two U.S. Marines
>
>_______________________________________________
>Milsurplus mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/milsurplus
>
>
>