[Milsurplus] RE: [ARC5] Re: A.R.C. Type 7544 ATA Tester
D C Macdonald
k2gkk at hotmail.com
Wed Dec 8 13:14:26 EST 2004
SCR-274 manual currently on the "e" place.
Check 2291165464.
Mac, K2GKK/5
----Original Message Follows----
From: David Stinson <arc5 at ix.netcom.com>
To: WA5CAB at cs.com
CC: boatanchors at theporch.com,
arc5 at mailman.qth.net,milsurplus at mailman.qth.net
Subject: [ARC5] Re: A.R.C. Type 7544 ATA Tester
Date: Wed, 08 Dec 2004 12:06:15 -0600
WA5CAB at cs.com wrote:
>Correction. Per list member who "done done it", works OK with AN/ARC-5 if
>appropriate 12-pin connectors and wiring are used.
Mine doesn't work that way. I never investingated,
but my 274N set would not work properly with AN/ARC-5.
Don't know why.
>...wonder why A.R.C. used a different connector pair on the late set?
To keep some 90-day wonder "radio man" from plugging in an ATA
screen modulator where an ARC-5 plate modulator should go.
>Brings up another thought, too. I actually have one but it never occurred
>to me to look, and it's currently two miles away. What rack series does
>the BC-950 fit?...
Standard SCR-274N rack.
>And which modulator did it work with?
The BC-456 modulator would have been there for the
HF transmitters.
As you noted, the BC-950 has it's own built-in 815 plate modulator.
You can see where this was removed in early runs of
the T-23/ARC-5 sets. In the ARC-5, they solved the
differing levels of mod needed between HF and VHF sets
by padding down the modulator output when in VHF mode.
I don't have a 274N VHF manual,
so don't know how they switched-out the BC-456 screen
modulator. If anyone does have this manual, I'd sure
pay for a copy.
73 DE Dave Stinson AB5S
_______________________________________________
ARC5 mailing list
ARC5 at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/arc5
More information about the Milsurplus
mailing list