[Milsurplus] GRC-215 HF Amp Pre/post Selector

[federico]

Hi John and Friends,
                    I have the Tech Manual of TN-612G the pre-post selector 
of RT-1512G part of GRC-215 REGENCY NETWORK. I'm searching the mating 
connector for the input of TN-612G and, more difficult to find, the output 
connector (MATRIX) of RT-1512G. The GRC-215 was developed for the C3 control 
of Patriot Missiles and was developed to guarantee (or try to guarantee) 
communications during and after termonuclear attack.
The pre-post/selector TN-612G get 100 mW from RT-1512 and (as far I know) 
have an output of 20 W to drive the PA at 400 W, I'm searching also the PA. 
Here in Europe you can find easily the TN-612/g that was manufactured by 
ELMER in ITALy under license of MAGNAVOX that built the other parts; when the 
decided to don't activate the Patriots the US Army bring back the GRC-215 
stations to the States, so here it is difficult to find RT-1512G and P.A., 
you can see some photo of my sistem in the link below.

Hope this helps


On Fri, 02 Apr 2004 11:48:14 +0400, jwatkins wrote
> Hi All,
> 
>  
> 
> Just wondering if anyone has found anything on these.  I think there 
> was a thread a few weeks ago on these.  I am thinking of using one 
> for a QRP setup with my RT-834.  I am getting just the amplifier portion.
> 
>  
> 
> Thanks,
> 
>  
> 
> John  WD5ENU/A45XV
> 
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment.  Attachments are not allowed.  To learn how
> to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
> _______________________________________________
> Milsurplus mailing list
> Milsurplus@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/milsurplus



Visit my webspace voted to military surplus radio and aircraft clocks :

www.dottorbaldi.it/militaryradio

See also :

http://www.geocities.com/pa0jta2/hamshacks.html