[Milsurplus] Re: [MV] Working radios in MV's
Joe Foley
[email protected]
Sat, 12 Oct 2002 07:46:29 -0700 (PDT)
This is what the Military Vehicles mailing list is
doing.
--- Patrick Jankowiak <[email protected]> wrote:
> I have considered it. Lowering the mic gain would do
> for TX.
>
> For RX, the audio gain could be increased to
> compensate for less output from the discriminator.
> It is a more complicated problem overall, as I think
> the SNR would be lowered due to the broad bandwidth
> of the IF stages. 5KHz of signal in a 15KHz window.
> A NB filter could be added, but at what oddball
> frequency? (I can look them up, but it's probably
> moot)
>
> Fortunately, the regs don't prohibit wideband FM as
> far as I can find, and others have looked up, they
> just discourage it's unnecessary use. In the case of
> a PRC-77 or RT246, I am using the minimum
> possible bandwidth, for that rig. I don't want to
> chop up a $300 or $450 antique radio either.
>
> I suggest that avoidance of interference with other
> stations would be the thing to do. The repeater
> handbook would be a good start for convoys, but I
> realize that the DX operators are out there too.
>
>
> Buzzard wrote:
> >
> > What about adjusting the radios to function within
> the regs. This is
> > pretty basic stuff.
> >
> > Any ham who can't or won't doesn't deserve their
> ticket!
> >
> > -=-
> > WM1W
> > -=-
> >
> > ===Mil-Veh is a member-supported mailing list===
> > To unsubscribe, send e-mail to:
> <[email protected]>
> > To switch to the DIGEST mode, send e-mail to
> <[email protected]>
> > To reach a human, contact <[email protected]>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to:
> <[email protected]>
> To switch to the DIGEST mode, send e-mail to
> <[email protected]>
> To reach a human, contact <[email protected]>
__________________________________________________
Do you Yahoo!?
Faith Hill - Exclusive Performances, Videos & More
http://faith.yahoo.com