[Milsurplus] TCS series Power supply
ROBERT W. DOWNS
[email protected]
Sat, 9 Feb 2002 13:59:00 -0500
Group,
The TCS shipboard power supplies have always been scarce, even the
PP-380/U's. I've collected TCS's since the 70's and in all that time onl=
y
managed to acquire two shipboard supplies (different type numbers) and
three PP-380's (only have one of each left). However, as it happens, I
have a fairly good supply of most of the power and remote connectors, bot=
h
cable (straight and right angle) and chassis. Some are NOS and some RFE
(and the equipment that they were removed from was mostly industrial [pip=
e
inspection or geophysical], not TCS's).
I also have some dual dynamotor 12VDC and single dynamotor 12/24VDC
dynamotor power supplies. Various conditions from good only for parts to=
NOS. Come to think of it, several years ago, I sold some of the dual
dynamotor units to four or five people for the purpose of building an AC
supply on the base/chassis. The duals have all three chassis connectors
and I'd guess about 85% of the necessary wiring already in place. Plus
there is an 8 HY 100 MA filter coke already in place in the receiver supp=
ly
line. For that matter, I have some of the chokes loose. Unfortunately,
the only TCS transformers that I have are all audio (receiver audio out,
transmitter microphone input & modulation). The only AC power transforme=
rs
that I have (or at least know that I have) are in that batch of !@#$% ARD=
receivers that I made the mistake of buying years ago. :-)
73
Robert Downs
<[email protected]>
Houston