[Microwave] flexible UT-141 equivalent

[Dr. Gerald N. Johnson]

Anything flexible and the same diameter will have more loss than the 
best UT-141. A couple years ago at MUD I took a length of LMR-240 with 
crimp on Emerson SMA connectors and at the VNA it measured half the dB 
loss as the best UT-141 at 10 GHz. Its not horribly expensive but it 
does take some care to get all the foil off the cut end of the dielectric.

73, Jerry, K0CQ

On 11/23/2016 2:02 PM, Dave Brown wrote:
> Looking for an eight inch (~20cm) length of a flexible equivalent or
> near equivalent to UT-141. Ideally no more loss that UT-141 and
> preferably less.
> Any suggestions as to where I might get this without selling the house?
> 73
> Dave, ZL3FJ
>
>
> ______________________________________________________________
> Microwave mailing list
> Home: http://mailman.qth.net/mailman/listinfo/microwave
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Microwave at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>