[Microphones] Microphones of many types FS

Ken Simpson, W8EK W8EK at flham.net
Sun Jul 3 13:39:03 EDT 2011


Microphones For Sale --
Desk Microphones, DTMF Touch Tone Microphones, Speaker
Microphones, and Microphone Stands and other Microphone
Accessories

Note: There are new listings, and also deletions.


Astatic Model 810-6 Gooseneck Microphone:

This mic is on a 12 inch gooseneck. The mic is a brushed
metal about 5 1/4 inches long, and is actually part of the
gooseneck. The cable goes thru the gooseneck. This has a
2 conductor shielded cable, so it is a quality balanced
microphone with about a 4000 ohm impedance. The gooseneck
terminates in a standard 5/8 inch threaded connector.

This one works fine and looks good. $45


Hand Microphone:

Azden PCM-463
I think this mic was used on the Azden PCS-4000 and probably
other Azden rigs as well.  It has an up/down switch on it,
and a round 8 pin connector.  This one works fine and looks
very close to new.  $35


DTMF Touch Tone Microphones:

Kenwood MC-46 DTMF Touch Tone Microphone
Touch tone DTMF microphone with 6 pin connector, as used on
TR-7730, TR-7800, TR-7850, TR-7930, TR-7950, TR-8400, TR-9000,
TR-9130, and others.  Up-down switch on top.  16 digit touch
tone pad. This one works fine, and includes paper work for $40.

Kenwood MC-48, DTMF Touch Tone Microphone
Round, 8 pin connector, will go with any Kenwood rig taking
this kind of connector (TM-201, TM-211, TM-221, TM-231,
TM-241, TM-2530, TS-50, TS-430, TS-440, TS-570, TS-850, TS-870,
TS-930, TS-940, TS-950, TW-4000, etc.).  Has UP and DOWN
switches and PTT, along with 16 digit touch.  This one works
fine, and looks close to new. With paper work for $45.

KDK DM TT-1 DTMF Touch Tone Mic
This mic has a 12 digit touch tone pad on it, with a
switch to turn the pad on and off. With 4 pin plug.
It works fine, and looks great. $35

KDK Model TM-2 DTMF Mic
With touch tone pad and up-down switches. It has been rewired
with a round 8 pin connector for Kenwood. Nice condition. $40

CES 610 L DTMF Touch Tone Mic
Can manually dial a number, or automatically store it in
the mic, and "speed dial". 12 digit touch tone pad on the
front. 8 pin modular plug (like computer LAN).
Looks to be new. $38

Johnson 250-0761-010 / CES 655 DTMF Mic
It has a 12 digit pad on the front, and is a rugged mic.
Presently with 4 pin plug. Looks to be unused. $38


HT Speaker Microphones:

Azden SDX-316 Speaker Microphone
Although it has an Azden name plate, it will also work
with Icom, some Yaesu, and Alinco that need 3.5 mm and
2.5 mm plugs.
This is the rounder style speaker mic that fits nicely in
the palm of your hand. $20

MFJ 286 Speaker Microphone
This was used on a Kenwood TH-225 HT, but it also fits the
TH-21/31/41 series HTs, TH-205, TH-215, TH-415, as well as
others. It has a 3 conductor 3.5 mm plug and a 2 conductor
2.5 mm plug. It works fine. $12

MFJ-287 Speaker Microphone
Fits same HTs as the MFJ 286 above, but is a smaller more
compact speaker mic. It works fine, and looks close to new. $15


Heil Wind Screen
This windscreen can be used with a variety of microphones,
including the GM-5. Excellent condition. $8


Cables for Heil (and other) Microphones:

Heil CC-1 XLR 4
3 pin XLR Male to 4 pin XLR Female $25

3 pin XLR to stripped and tinned ends
About 10 feet of quality rubber covered mic cable with a 3 pin
XLR connector on one end, and nothing on the other end. Ideal
to add your own connector. Can be used with the CC-1 XLR-4
above. $20

Heil round 8 pin connector to 8 pin modular connector for Icom
Not positive of the number, but it might be HSTA-IM or HSTA-706
$15


Microphone holders:

Electro Voice
Gray colored EV, designed to hold 5/8 to 3/4 inch diameter mics,
and go into a stand with standard 5/8 inch threads. $5

Chrome Mic holder
Similar to EV holder, but chrome metal with a green felt on the
inside to protect the mic. For 1/2 inch to 5/8 inch diameter
microphones. Standard 5/8 inch threads. $5


Microphone Holder from a Kenwood MC-60 desk microphone
This is the black plastic (or is it bakelite ?) piece that
attaches to the mic stand and holds the mic.  It looks like
new. Ideal if yours is broken.
It probably is used on other mics as well.  $10


Prices do not include shipping from Florida.


I also have many other accessories available such as many
different types of HTs, VHF and UHF rigs, HF and VHF/UHF
antennas, etc.
Just too many to list here. Please e-mail your requests.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone  (352) 732-8400





More information about the Microphones mailing list