From kenw8ek at gmail.com  Wed Apr 20 19:44:32 2016
From: kenw8ek at gmail.com (Ken, W8EK)
Date: Wed, 20 Apr 2016 19:44:32 -0400
Subject: [MFJ-Ameritron] MFJ Items FS
Message-ID: <154017e4-e967-50e3-a4a1-9fbe1ed504dd@gmail.com>


MFJ Items For Sale:

Dry Dummy Load, HF Antenna Tuner, CW Paddles, Coax
Switch, and more


MFJ 260 B, "Dry" 300 Watt Dummy Load:
The MFJ-260B is an air cooled, non-inductive resistor in
a perforated metal housing. It has SO-239 connectors. It
will handle a full load of 300 watts for 30 seconds, and
has a silk-screened derating curve on the end. SWR is
below 1.1:1 to 30 MHz, 1.5:1 from 30 to 250Mhz. It
measures 2 1/4x2 1/4x7 inches.
Specifications:
IMPEDANCE: 50 Ohms, ? 10 %
POWER: 300 Watts for 30 seconds
DISSIPATION: (2 min cooldown) 25 Watts continuous
DIMENSIONS: 2?" x 2?" x 7"
This one works fine and looks very close to new.
With paper work for $28.


MFJ 901 B, HF Antenna Tuner:
The MFJ-901B is MFJs smallest and most affordable 200 Watt
PEP Versa Tuner. Its designed to match virtually any transmitter
(up to 200 Watts RF power output) to almost any antenna. This
includes dipoles, inverted vees, random wires, verticals, mobile
whips, beams, and others fed by coax lines or single wire from
160 through 10 Meters. It works continuously from 1.8 to 30
MHz. A 4:1 balun is built in for balanced lines.
It measures 5 x 2? x 6 inches.
Because it is small, it is often used for mobile operation,
although it is certainly fine for the shack also.
This one works 100% and looks like new. No defects.
With paper work for only $60.


MFJ 564 Chrome CW Paddles:
The MFJ 564 is basically a clone of the Bencher BY-2 paddles.
It has an extremely nice chrome base.
It has full range adjustment in tension and contact spacing,
with self-adjusting nylon/steel needle bearings and non-skid
feet and heavy base.
This particular unit appears to be new. It is in its original
box, and includes a cable with a gold plated 1/8 inch (3.5
mm) stereo connector. The cable alone is worth $10!
Buy this one for only $60.


Two position "Strip Line" Coax Switch
The MFJ 1702 B switch utilizes metal cavity construction for max
efficiency and high isolation. This two position coax switch has
a new center ground protection! Better than 60 dB isolation at
300 MHz and better than 50 dB at 450MHz. 50 Ohm. The unused
terminal is automatically grounded for static and RF protection.
It has less than 0.2 dB insertion loss and SWR below 1.2:1.
Heavy cavity type construction and SO-239 connectors.
Mounting holes. It looks great. With paper work for $20.


9 Volt DC at 500 ma Wall Wart
This unit was used on a MFJ 422 keyer, but will also power other
items needing 9 V DC. It has a 2.5 mm male plug on it, tip positive.
$12


I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.


Prices do not include shipping from Florida.


Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400