[MFJ-Ameritron] MFJ Memory Keyer and other MFJ items FS

[Ken Simpson, W8EK]

MFJ Grandmaster Memory Keyer, Wall Wart power supplies,
Speaker Mics, and misc items For Sale:


MFJ 484 C "Grandmaster" Memory Keyer:

MFJ 484 C "GrandMaster" Keyer with Memories
This keyer has a built in sidetone, with volume and tone
adjustable on the front panel. Speed and weighting are
also adjustable from the front panel.
It has 4 large memories. You may install a 9 volt battery
to preserve memory contents during a power failure. It can
be powered by either a 9 Volt battery, a 9 to 12 V DC wall
wart, or your station 12 V DC power supply.

It is a nice eggshell white and wood grain enclosure that
matches the TenTec KR-2 paddle. This one works fine and
looks great.

With paper work for $55.


MFJ 1312 Wall Wart power supply

This unit provides 12 V DC at 500 ma It has a small 2.5
mm male plug, and is often used for keyers (such as the MFJ
484 above), lighting tuner lights, and other small misc jobs
where 12 V DC at low current is needed. $10


AEA AC-1 "Wall Wort" Power Supply

This "Wall wort" power supply will supply 12 V DC at
up to 1 amp.

This unit has a 2.1 mm plug, with the center positive,
so it can be used on many different things that require
12 V DC at up to an amp, such as keyers, antenna tuners,
etc., including many MFJ items.

This is a "regular" wall wort -- not the new switching
type that creates all sort of noise in your receiver.
Get this one, and leave the noise behind.  $14


MFJ 286 Speaker Microphone
This was used on a Kenwood TH-225 HT, but it also fits the
TH-21/31/41 series HTs, TH-205, TH-215, TH-415, as well as
others. It works fine. $12

MFJ-287 Speaker Microphone
Fits same HTs as the MFJ 286 above, but is a smaller more
compact speaker mic. It works fine, and looks close to new. $15


Cables for CW keys and keyers:

Cable for paddles
About 3 feet long, and with a 1/8 inch (3.5 mm) stereo
connector on the end, like used by most rigs. $8
As above, but 1/4 inch plug. $8

Cable for straight key
About 3 feet long, with a mono 1/8 inch (3.5 mm) phone
plug on it, as is used with a straight key. $5
As above, but 1/4 inch plug. $5


Coax connectors and adapters:

Prices are per connector. Several of each are available.
These are NOS (have not been used).

"N" Connector - Double Male $8

BNC male for coax cable
standard type $2
crimp on type $3

Chassis mount BNC female
square mount (uses 4 screws) $3
screw in type $3

BNC "T" - two female and one male $3

Antenna adapter to fit the BNC connector on the HT
and provide an SO-239 connector that will permit
a PL-259 to be attached. (BNC male to UHF female) $5

UHF Male (PL-259) to BNC female (opposite of above) $5

UHF double female "Barrel connector" (two SO-239 together) $3

UHF "Bulkhead Connector" - Double female, as above, but for
mounting thru a window, siding, etc. about 3 inches long $6

UHF double male connector (two PL-259's together) $3

UHF "T" connector with two female (SO-239) and one male
(PL-259) connection $5


I also have many other accessories available such as many
different types of microphones, HTs, HF, VHF and UHF rigs,
HF and VHF/UHF antennas, etc.
Just too many to list here. Please e-mail your requests.


Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400