[MFJ-Ameritron] MFJ Antenna Tuner, Speaker Microphones FS

[Ken Simpson, W8EK]

MFJ Antenna Tuner, Speaker Mic, plus other microphones For Sale:


MFJ 948 antenna tuner for 160 thru 10 meters

This tuner has a "cross needle" SWR bridge built into it,
so you can read both forward power and SWR at the same
time. The meter has a back light, assuming 12 Volts is
applied to the tuner. The wattmeter portion will read
either 30 W or 300 W full scale. An antenna switch will
switch between either balanced line, two coax antennas,
or a dummy load. Antennas can be operated thru the tuner,
or the tuner can be bypassed.

This tuner will operate on 160 thru 10 meters, including the
WARC bands.

This particular unit works 100%. It looks very close to new.
Almost like it just came out of its box.
Manual is included for $100


Speaker Microphones:

MFJ-287 Speaker Microphone
This was used on a Kenwood TH-225 HT, but it also fits
the TH-21/31/41 series HTs, TH-215, TH-415, as well as
others. It has a 3 conductor 3.5 mm plug and a 2 conductor
2.5 mm plug. $15

Kenwood SMC-24 speaker microphone
Fits Kenwood TR-2400 HT and others. This one looks fine
and works fine. $18

Azden SDX-316
This is the rounder style speaker mic that fits nicely in
the palm of your hand. Has 3.5 mm and 2.5 mm plugs for
Azden, Icom, some Yaesu, and others. $ 20


Microphones:

All of these microphones have been tested and work well.

Johnson Hi Z Hand Microphone
This high impedance hand mic is a gray color, with the
Johnson logo with the Indian on it. It has a PTT switch and
coiled cord, and produces a nice pattern on the scope. It
looks good also. $30

Generic Hi Z Hand Microphone
This hand mic is black in color, and looks like it might
have come from a HyGain rig. It has a PTT switch and black
coiled cord. $25

Shure 401 B, Low Z Hand Microphone
This mic has characteristics similar the the Shure 444
Desk Mic, but this one is a hand mic. It is a controlled
magnetic mic, with frequency response tailored for voice
communications. It has a rugged case, and a heavy duty
coiled cord. 4 pin connector. With paper work for $40.

Shure 104 C, Low Z hand Microphone
This is a very heavy duty Shure mic. It appears to be new,
with stripped and tinned ends that have never been on a
connector. It is in its original box, with the original
instruction manual. $30

Chrome Low Z Hand Microphone
This mic is chrome plated. My memory says it may have come
from a Polycom rig. The mic is a good solid metal case with
chrome plating all around, with a black PTT switch and black
coiled cord. There are some pits on the chrome; it works
fine. $30

Generic Hand Microphone
This is a low impedance hand microphone, black in color.
With 4 pin connector. $25
With no connector. $22

Lafayette EAM-15 dynamic hand microphone
2000 ohm impedance can be used any place a dynamic mic is
needed. Stripped and tinned leads.
It works fine, and looks good also. $25


DTMF Touch Tone Microphones:

KDK DM TT-1 DTMF Touch Tone Microphone
This mic has a 12 digit touch tone pad on it, along with a
switch to turn the pad on and off. I presently has a 4 pin
plug on it, and can be used on most any rig. It works fine,
and looks great. $35

CES 655 L "Microdialer" DTMF Microphone
You can manual dial a number, or automatically have it
stored in the mic, and "speed dial" with this mic. 12
digit touch tone pad on the front, with the microphone
part above the pad. This one presently has a 4 pin plug
on it, but of course that can be changed. $35

CES 600 L, Universal DTMF microphone
This has a normal touch tone pad on the front, with
a low impedance microphone. This one has the 8 pin
modular plug (like a computer LAN) on it. This mic has
not been used, so it is in really great condition.
With paper work for $40.

Data Signal "Data-Coder 5" touch tone mic
This mic has a 12 digit touchtone pad on it, plus a
normal low impedance microphone. With 4 pin plug.
Like new. $38


Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone  (352) 732-8400