I, or rather my brother, found on mouser a 0.15ohm 15 watt axial ceramic resistor. Min quantities one.
so I’m good. 

----- Original Message -----
From: Mike Stillwell <[email protected]>
To: Marshall County ARC <[email protected]>
Sent: Fri, 12 Nov 2021 19:05:42 -0500 (EST)
Subject: Re: [MCARC] Emitter resistor

Tnx…. I found some on eBay 0.5 ohm @ 5 watts and 3 in parallel will be close to what I need.0

----- Original Message -----
From: Myron Nolind <[email protected]>
To: Marshall County ARC <[email protected]>
Sent: Fri, 12 Nov 2021 13:51:33 -0500 (EST)
Subject: Re: [MCARC] Emitter resistor

I don’t have any. Mine are .1 ohm at 5 watts. 

On Fri, Nov 12, 2021 at 9:45 AM Mike Stillwell <[email protected]> wrote:
I think that Astron uses a 0.5 or 0.05 ohm from what I found.
let me know thanks.
Mike


----- Original Message -----
From: Myron Nolind <[email protected]>
To: Marshall County ARC <[email protected]>
Sent: Thu, 11 Nov 2021 20:52:05 -0500 (EST)
Subject: Re: [MCARC] Emitter resistor

I may have one from Astron power supply. Will let you know tomorrow 

On Thu, Nov 11, 2021 at 5:38 PM Mike Stillwell <[email protected]> wrote:
I’m looking for what they call an emitter resistor Which goes on a power supplies pass transistors on the emitter lead. The value I need is 0.18 ohms at 15 watts and will be a ceramic with axial leads. I doubt if any of you have one but I need to ask thank you
______________________________________________________________

MCARC mailing list

Home: http://mailman.qth.net/mailman/listinfo/mcarc

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:[email protected]


This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html


______________________________________________________________

MCARC mailing list

Home: http://mailman.qth.net/mailman/listinfo/mcarc

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:[email protected]


This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html