[MCARC] Emitter resistor

[Myron Nolind]

I don’t have any. Mine are .1 ohm at 5 watts.

On Fri, Nov 12, 2021 at 9:45 AM Mike Stillwell <gwtouring at bluevalley.net>
wrote:

> I think that Astron uses a 0.5 or 0.05 ohm from what I found.
> let me know thanks.
> Mike
>
>
> ----- Original Message -----
> From: Myron Nolind <myron.w0mdn at gmail.com>
> To: Marshall County ARC <mcarc at mailman.qth.net>
> Sent: Thu, 11 Nov 2021 20:52:05 -0500 (EST)
> Subject: Re: [MCARC] Emitter resistor
>
> I may have one from Astron power supply. Will let you know tomorrow
>
> On Thu, Nov 11, 2021 at 5:38 PM Mike Stillwell <gwtouring at bluevalley.net>
> wrote:
>
>> I’m looking for what they call an emitter resistor Which goes on a power
>> supplies pass transistors on the emitter lead. The value I need is 0.18
>> ohms at 15 watts and will be a ceramic with axial leads. I doubt if any of
>> you have one but I need to ask thank you
>> ______________________________________________________________
>>
>> MCARC mailing list
>>
>> Home: http://mailman.qth.net/mailman/listinfo/mcarc
>>
>> Help: http://mailman.qth.net/mmfaq.htm
>>
>> Post: mailto:MCARC at mailman.qth.net
>>
>>
>> This list hosted by: http://www.qsl.net
>>
>> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
> ______________________________________________________________
> MCARC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mcarc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MCARC at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mcarc/attachments/20211112/a60e1b61/attachment.html>