[MAMS] 24 Gig L.O.

[Zack Widup]

Yes, Thanksgiving was good. I drove to Wisconsin. I ate too much!
:-)

I was curious about the IF because most people are using 144 MHz as the IF
for 10 GHz but a few people use 28 MHz. You need tighter 10 GHz filters to
keep the IF image from being transmitted if you use 28 MHz IF.

Good luck on it.

73, Zack W9SZ


On Sun, Dec 12, 2010 at 3:07 PM, M Ragouzis <n0obi at yahoo.com> wrote:

> Hi Zack
>
> At this time I'm setting up to run 20 meter ( 14.286 osc ) just to see if
> the
> thing will work at all ???
> I'm looking up the crystal osc I picked up from gateway yesterday.
> I hope to run it as a 2 meter recieve IF for the 10GHZtransvertor.
> In and hour or so I should know if it will work at all ???????
>
> I have the Flex-Power SDR running as " demo " on an old IBM T-41 think-pad
> ,  I
> thought the "Tiny-SDR" would be a good start , if this dosnt pan out , I
> will
> order the " SoftRockSDR" and set it up on 10Meter.
>
> I still have the Icom 2M all mode to use in the transmit mode , I thought
> it
> would be cool to have a software recieve radio.
>
> All is good , I hope you had a good Thanksgiving !!!!!
>
> 73 Mike
> N0obi
>
>
>
>
>
> ________________________________
> From: Zack Widup <w9sz.zack at gmail.com>
> To: Mid-America Microwave Society <mams at mailman.qth.net>
> Sent: Fri, December 10, 2010 10:34:06 PM
> Subject: Re: [MAMS] 24 Gig L.O.
>
> Mike, what IF frequency are you using from the Tiny SDR?
>
> 73, Zack W9SZ
>
>
> On 12/10/10, M Ragouzis <n0obi at yahoo.com> wrote:
> > Hi Dave
> >
> > I'm getting power sdr up and running and will try to get the "Tiny SDR"'
> > reciever up and running as an IF for the GHZ bands.
> > 10 GHZ first !!!!!!
> >
> > Just thoughts
> > 73
> > Mike
> >
> > N0obi
> >
> >
> >
> >
> > ________________________________
> > From: Dave Calvert <kb0pe at yahoo.com>
> > To: Mid-America Microwave Society <mams at mailman.qth.net>
> > Sent: Sat, December 4, 2010 1:20:00 AM
> > Subject: [MAMS] 24 Gig L.O.
> >
> > Zack,
> > This subject is meant for you!   I have been trying to call you to talk
> > about
> > your 24 Gig L.O.
> > I don't remember the design but it is PLL correct?  Could it be possible
> for
> > you
> >
> > to make me
> > two circuit boards so that I can build two of these?  What would you
> charge
> > for
> > this?
> >
> > 73,
> > Dave - KB0PE
> >
> >
> >
> > ______________________________________________________________
> > MAMS mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/mams
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:MAMS at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
> >
> >
> >
> > ______________________________________________________________
> > MAMS mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/mams
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:MAMS at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
> ______________________________________________________________
> MAMS mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mams
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MAMS at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
>
> ______________________________________________________________
> MAMS mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mams
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MAMS at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>