[Lowfer] TAG in CT

[John Andrews]

Jay,

Thanks! I bet it's been 5 years since I last trimmed the frequency on 
that OCXO. A very well-aged crystal. I shut the exciter down by mistake 
this summer -- usually leave it running for crystal-happiness. But it 
doesn't seem to have made much difference. The continuous running thing 
is probably more important earlier in a crystal's life.

John, W1TAG

On 11/4/2025 10:09 PM, jrusgrove--- via Lowfer wrote:
> TAG looking quite robust in CT tonight. Frequency accuracy good ... didn't have time for a detailed measurement but accurate to at least the single digit mHz range.
> 
> Jay W1VD
> 
> 
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html