[Lowfer] WM Lowfer Beacon

[N8OOU]

For anyone needing more info on the WM Lowfer, here is the info Gedas 
was asking for;

Frequency is 185300 Hz plus a smidgen. I am shifted up a little to not 
drift down on SIW. The message is sent as a graphic intended to paint 
correctly on a QRSS 30 Argo type screen. That graphic looks like the 
letters WM in FSKCW - 60, FSKCW - 30, and Hand Written.  My exciter is 
based on the Atmel 386P uP driving a SI5351s Clock generator chip. The 
PA is a Bipolar transistor Push/Pull design, with 1 Watt Input power 
following FCC Part 15 rules. The Antenna is a 30Ft tall Wire with a 
Marconi style tophat. My grid is EM68es. On air by me since 2015.

My website has been down for 6 months or so. I just established a new 
server and am working to get the beacon info back online. The old site 
can be found on archive.org, search for "wmbeacon.meekfarm.us".

73   de   N8OOU - Mike Meek

On 9/30/23 13:32, Gedas wrote:
> Can you provide details; freq, mode, message, power, antenna, grid, etc 
> so that we can have a listen for it?
> 
> Gedas, W8BYA EN70JT
> 
> Gallery athttp://w8bya.com
> Light travels faster than sound....
> This is why some people appear bright until you hear them speak.
> 
> On 9/30/2023 1:42 PM, N8OOU wrote:
>> WM Lowfer Beacon is back to bubbling. "Same Time Same Channel"  I 
>> don't know how far the bubbles will go, but I see them going up the wire.
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html