[Lowfer] SIW WM and TAG - Indiana

[John Andrews]

Gedas,

Sticking with Argo, you might want to try the QRSS30 screen, with "Slow" 
selected. That'll give you a wider frequency spread.

Or, you could start playing with Spectrum Lab, with a big learning 
curve, but the ability to customize stuff like this. The SpecLab screen 
I'm currently running shows from 185.294 to 185.308 kHz.

John, W1TAG

On 11/12/2023 12:46 PM, Gedas wrote:
> I noticed SIW & WM coming in better than normal but with moderate/heavy 
> QSB. I am still trying to dial in my receivers freq so the enclosed 
> captured will show things off a bit. I did not see signs of TAG at all.
> 
> Is there any way to extend the frequency range in ARGO for a given mode 
> like QRSS-60?  It sure would be neat to cover the watering hole and a 
> little higher in frequency.  73
> 
> Gedas, W8BYA EN70JT
> Light travels faster than sound.....
> This is why some people appear bright until you hear them speak.
> 
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html