[Lowfer] Lowfer TAG in NE IL

[John Hamer]

Garry,

This is the first cold night we have had here and without the aid of the
humidity, I can't get to the full 1 watt mark. It is about 800mW. My new
antenna is a little shorter than my previous one, so I will need to figure
something out for the future. But,  it is resonant so hopefully you will
capture something.

John Hamer

On Thu, Nov 17, 2022, 11:54 PM John Hamer <wilbur0611 at gmail.com> wrote:

> I'll go make sure JH is tuned up before I go to bed.
>
> On Thu, Nov 17, 2022, 11:32 PM Garry <k3siw at sbcglobal.net> wrote:
>
>> Finally decoded all Morse characters of lowfer TAG. Plenty of QSB
>> apparent in the attached screen capture. but ARGO at QRSS60 generally
>> pulled things through. Now will be looking on 181.820 kHz for JH and KE.
>>
>> 73, Garry, K3SIW, EN52ta, Elgin, IL
>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
>