[Lowfer] Lowfer TAG?

[lmlangenfeld]

QRSS60 (or 30) is fine with me.TNX,Mark -- WA9ETWSent from my U.S. Cellular® Smartphone
-------- Original message --------From: John Andrews <w1tag at charter.net> Date: 10/20/20  1:16 PM  (GMT-06:00) To: "Discussion of the Lowfer (US, European, &, UK) and MedFer bands" <lowfer at mailman.qth.net> Subject: [Lowfer] Lowfer TAG? I used to run Lowfer TAG from Raymond, ME over the winter, from the end of October through some point in May. A couple of years ago, I had to take the antenna down due to tree removal next to our cottage. I'm presently at the point where I could put up something like the original loop, but probably with #12ga wire instead of the old RG-8 (I do mean OLD, as that cable is 73 years OLD).TAG had been running on 185.297 kHz, with QRSS60. Looking at the beacon list, I see no problem, but want to be sure that there has been no observed activity there. The frequency is stable -- probably within 0.01Hz over the winter. TAG would be on the same screen used for viewing WM, SIW and SJ.Another choice would be to resurrect WOLF, and put the beacon on 185.500 or 185.800 kHz. But I suspect there are few left who have any interest in that mode.Any comments before I proceed?John, W1TAG______________________________________________________________Lowfer mailing listHome: http://mailman.qth.net/mailman/listinfo/lowferHelp: http://mailman.qth.net/mmfaq.htmPost: mailto:Lowfer at mailman.qth.netPost must be less than 50KB total for message plus attachment!This list hosted by: http://www.qsl.netPlease help support this email list: http://www.qsl.net/donate.html