[Lowfer] FST4W

[jrusgrove at comcast.net]

Ratio is for transmit sequencing and has no effect if only set up to receive.

Jay W1VD 


----- Original Message -----
From: John Bruce McCreath <weazle at hurontel.on.ca>
Reply-To: Discussion of the Lowfer (US, European, & UK) and MedFer bands <lowfer at mailman.qth.net>
To: LowFER (US European <lowfer at mailman.qth.net>
Sent: 11/10/2020 11:21:20 PM
Subject: Re: [Lowfer] FST4W
________________________________________________________________________________


That was a typo on my part….136.000 kHz. is the correct dial setting.
Do you have the T/R set to 1800 and the ratio at Random?

73, J.B., VE3EAR

LowFER Beacon "EAR"
188.835 kHz. QRSS30
EN93dr



______________________________________________________________
Lowfer mailing list
Home: http://mailman.qth.net/mailman/listinfo/lowfer
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Lowfer at mailman.qth.net
Post must be less than 50KB total for message plus attachment!

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html