[Lowfer] KE

[KA4SEY]

Sounds good, I accidentally put 000mw, I've been playing with it and now
it's doing 100mw straight to the antenna. Different configurations give
different results.

Kasey

On Wed, Dec 16, 2020 at 3:11 PM Douglas Williams <williamsdoug1966 at gmail.com>
wrote:

> I will monitor that frequency tonight with Argo set to 187.305 kHz. Your
> 000mw power level may present a challenge.
>
> D. WB4DW
>
> On Wed, Dec 16, 2020 at 1:54 PM KA4SEY <ka4sey at gmail.com> wrote:
>
> > LowFER "KE" is officially back on the air. Replaced the 5 volt regulator
> > and two essential chips. Currently running 000mw. Slight shift in
> frequency
> > though. I'm currently reading 187305.20 in QRSS 30. Reports are
> > appreciated, Thanks.KA4SEY, KaseyLowFER "KE"187.305 kHzQRSS 30
> > ______________________________________________________________
> > Lowfer mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/lowfer
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Lowfer at mailman.qth.net
> > Post must be less than 50KB total for message plus attachment!
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>