[Lowfer] Lowfers received in NE IL

[John Hamer]

Thanks for the report Garry, I have tuned the oscillator frequency down a
little to try and get it closer to 181.818. It looks like I'm much closer
than before.

What are you using to calibrate frequency? I have tried a few time signal
carriers, but they don't all seem to agree. Is a time carrier not a good
way to do it? Is there a slight frequency shift due to some type of effect?

I bought some GPS modules a while back with intentions of making an
oscillator that locks onto the 1 second pulse. My project list grows faster
than I can complete them though.

Regards,
John Hamer

On Fri, Dec 11, 2020 at 9:33 AM John Bruce McCreath <weazle at hurontel.on.ca>
wrote:

>
> Thanks for the Argo snip and report on EAR reception, Garry.
> In cleaning up the shack yesterday, I thought I might have
> disturbed some wiring, but obviously not, as it was heard.
>
> 73, J.B., VE3EAR
>
> LowFER Beacon "EAR"
> 188.835 kHz. QRSS30
> EN93dr
>
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>