[Lowfer] My Active Loop is apparently dead

[k2ors at verizon.net]

Sorry to hear that Andy.Unfortunately, Wellbrook pots the electronics in the preamp so not really repairable.You could put a DIY preamp in place of the Wellbrook one.Barring that Wellbook will sell you a replacement preamp.
73 Warren


-----Original Message-----
From: Andy - KU4XR via Lowfer <lowfer at mailman.qth.net>
To: Discussion of the Lowfer (US European & UK) and MedFer bands <lowfer at mailman.qth.net>
Sent: Wed, Nov 20, 2019 8:36 pm
Subject: [Lowfer] My Active Loop is apparently dead

Hi all:

Thanks for the replies about the loops proximity to my TX antenna. I appreciate that. I got the loop about
2 years ago - used - and it has sat in my garage till today. When I appled power - DEAD - Performed all the
fault checks, and have 12 volts DC with correct polarity on the BNC at the loop. Can only conclude that the
Active Electronics in the box at the loop are dead.

73 all, and good DX:

Andy - KU4XR
______________________________________________________________
Lowfer mailing list
Home: http://mailman.qth.net/mailman/listinfo/lowfer
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Lowfer at mailman.qth.net
Post must be less than 50KB total for message plus attachment!

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html