[Lowfer] Need recommendation for anti-corrosion bonding for dissimilar metals

[N8OOU]

Andy,

I have had good success using the original GE Silicon Caulk in a 
blue/clear tube. A medium thick coating over all the parts after 
assembly lasts a long time, and it sticks tightly to just about 
everything. It may take a little work, but all caulking can be removed 
for dis-assembly.

For shorter term, easier to dis-assemble cover the parts with a layer of 
Plumbers Putty, then carefully wrap that with black electricians tape.

Good Luck.

73   de   N8OOU - Mike Meek

On 09/25/2018 07:30 PM, Andy - KU4XR via Lowfer wrote:
> Hi all:
> 
> What can be used ( and purchased at home repair store, etc ) to hold off corrosion when bonding galvanized,
> aluminum, or stainless steel to copper ?? ( my ground rod specifically ) .. The white - powdery corrosion sets in
> very quickly.. Thanks for suggestions:
> 
> 73:
> 
> Andy - KU4XR
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
>