[Lowfer] Looking for small BalUn, 50 Ohm to 100 Ohm.

[jrusgrove at comcast.net]

Kurt

#22 might be too big to fit with the number of turns involved. #30 would be a better fit. Have cores / wire handy here and would be glad to send a 'care package'.

Jay


----- Original Message -----
From: KD7JYK DM09 <kd7jyk at earthlink.net>
Reply-To: Discussion of the Lowfer (US, European, & UK) and MedFer bands <lowfer at mailman.qth.net>
To: Discussion of the Lowfer (US, European, & UK) and MedFer bands <lowfer at mailman.qth.net>
Sent: 11/30/2018 3:25:27 PM
Subject: Re: [Lowfer] Looking for small BalUn, 50 Ohm to 100 Ohm.
________________________________________________________________________________

"BN73-202 binocular core ... 7 turn primary / 5 turn secondary. Unlikely 
you could build or buy anything better. Can send you just a core or wind 
it up for you. Let me know."

I had an incredibly over-elaborate response here, but with your 
description, and finding instructions for a kit that matches, with 
pictures (Kits and Part 10W Linear), I'm pretty sure I can figure this 
one out, by focusing on the turns, and skipping the math, at this 
point.  I found a source for binocular cores, and 22 awg red and green 
wire.  This may be a good chance for me to learn, I gave up around 
1993.  If I screw it up, I'll get back to you.

Thanks for the offer, and, the INFO!

Kurt



______________________________________________________________
Lowfer mailing list
Home: http://mailman.qth.net/mailman/listinfo/lowfer
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Lowfer at mailman.qth.net
Post must be less than 50KB total for message plus attachment!

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html