[Lowfer] SIW (WM) in CT

[Michael Sapp]

Garry: FB. I was curious if the 40/42 or 40/44 grade could handle the 
voltage with a 1W lowfer....

175/40 gets pricey in hundreds of feet....   I have this 55mh litz wire 
inductor out of an ultrasonic welding machine (or so I was told)....

https://www.dropbox.com/s/qkaul8s9n1k9d9f/IMG_0513.JPG?dl=0

Not sure what I would use it for....thought about a base-loaded VLF e-probe 
but I think I would have to dig that old 4-65A out of the back room as the 
active device  to handle the QRN pulse discharge ~:)

73 Mike wa3tts


----- Original Message ----- 
From: "Garry" <k3siw at sbcglobal.net>
To: <lowfer at mailman.qth.net>
Sent: Friday, January 13, 2017 11:34 PM
Subject: Re: [Lowfer] SIW (WM) in CT


> Mike, I used 20/40 Litz wire because it was inexpensively available via 
> eBay and got about 10 ohms DC resistance. More expensive 175/40 wire would 
> have been better.
> -- 
> 73, Garry, K3SIW, EN52ta, Elgin, IL
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html