[Lowfer] A Question to Windows-7 users

[jrusgrove at comcast.net]

Andy

If I understand your question correctly ...

In  control panel > sound > recording tab is stereo mix present? If not, right 
click white area and check the 'show disabled devices' and 
'show disconnected devices'. Highlight and right click the now present stereo 
mix (wav) to get to properties. Make this the default device.

On the recording tab highlight 'line in' and right click to get to properties. 
On the 'listen' tab check the 'listen to this device' box and pick your 
playback device from the drop down choices.

Choose the desired input and output devices for within the WSPR, etc 
application.

Jay W1VD  WD2XNS  WE2XGR/2  







----- Original Message -----
From: Andy - KU4XR via Lowfer <lowfer at mailman.qth.net>
Reply-To: Andy - KU4XR <ku4xr at yahoo.com>, Discussion of the Lowfer \(US, 
European, & UK\) and MedFer bands <lowfer at mailman.qth.net>
To: 1750 Meter lowfer list <lowfer at mailman.qth.net>, 600 meter group 
<600mrg at w7ekb.com>
Cc: Andy - KU4XR <ku4xr at yahoo.com>
Sent: 1/2/2017 12:41:47 PM
Subject: [Lowfer] A Question to Windows-7 users


HNY everyone:

After moving to a Windows-7 PC , I quickly discovered the inability to 
" steer " the audio to multiple sound
cards that are installed .. Windows-XP allowed this .. I am using the on board 
sound as Recording device,
and a SB Audigy as the Playback device . In XP, I could choose my Recording ( 
Input ) card for the output
of WSJT-X, and SpecLab , etc. to key the radio, and not blast back thru the 
speakers, but Windows-7 will
not allow this to be done, the " wav " path between devices is disabled in 
Windows-7. I would like to know
what solutions any of you have found to work around this issue. Thanks for any 
advice, and 73:

Andy - KU4XR
______________________________________________________________
Lowfer mailing list
Home: http://mailman.qth.net/mailman/listinfo/lowfer
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Lowfer at mailman.qth.net
Post must be less than 50KB total for message plus attachment!

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html