[Lowfer] Hifer WM this morning

John Hamer wilbur0611 at gmail.com
Thu Jun 2 21:29:07 EDT 2016


EH and SIW are there about every time I cut on my receiver. Your signal
popped up again last night for a little bit.
www.jwhamer.me/grabber/archives.html
On May 27, 2016 7:03 AM, "N8OOU" <n8oou at meekfarm.us> wrote:

> John, Thanks for the screenshot access.  I was able to match up my local
> capture with yours. I am pleased to see our clocks are within a second or
> so.  Over the past couple weeks I have been tweaking the U3S parameter to
> get it's TOD clock accurate so the the JT9 transmission starts at the
> proper time..
>
> If you have a minute to waste, my capture is here;
> https://www.dropbox.com/s/w3g0elmivm9qq5k/may250154.jpg?dl=0
>
> The garbage at the end of the FSKCW is the CW ID, and the beginning of the
> FSKCW is JT9.
>
> I have an ICOM 706, and it uses LSB as the default for CW. to invert the
> Argo display I must use the CW-R mode. I believe ICOM used that logic on a
> number of their radios.
>
> Good captures on EH, USC, and SIW.
>
> 73   de   N8OOU - Mike Meek
>
> On 05/26/2016 07:34 PM, John Hamer wrote:
>
>> I have the screenshots with the times at
>> http://www.jwhamer.me/grabber/5_26_2016/
>>
>> I have also received EH and USC. USC is close, but I have the antenna
>> pointed North South and USC is West. I may have a copy if SIW also, but I
>> do not have software to decode wspr at the moment.
>>
>> John Hamer
>>
>> On Thu, May 26, 2016 at 6:36 PM, N8OOU <n8oou at meekfarm.us> wrote:
>>
>> John,
>>>
>>> Thanks for the WM report and capture. Your new receive setup would appear
>>> to be working well.
>>>
>>> I have been experimenting with the transmitter output bias setting today.
>>> I have a remote receiver capturing my beacon, if you would give me the
>>> time
>>> window of hearing my beacon, Maybe I can match it back to my capture
>>> here.
>>>
>>> Thanks again for taking the time to listen.
>>>
>>> 73   de   N8OOU - Mike Meek
>>>
>>>
>>> On 05/26/2016 12:43 PM, John Hamer wrote:
>>>
>>> I was testing out my new ICOM R71a I bought from eBay this morning and
>>>> picked up WM. My antenna was just a dipole made from speaker wire with a
>>>> 1:1 balun attached to some trees in my yard. Pretty good capture. This
>>>> is
>>>> the first time I have received a positive confirmation from a
>>>> lowfer/hifer
>>>> beacon other than my own. I am located in Conway SC. I am pretty sure I
>>>> saw
>>>> NC also, but not clear enough to confirm. Very excited about my
>>>> purchase!
>>>>
>>>> John Hamer
>>>>
>>>> [image: Inline image 1]
>>>>
>>>>
>>>>
>>>> ______________________________________________________________
>>>> Lowfer mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Lowfer at mailman.qth.net
>>>> Post must be less than 50KB total for message plus attachment!
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>
>>>> ______________________________________________________________
>>>>
>>> Lowfer mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Lowfer at mailman.qth.net
>>> Post must be less than 50KB total for message plus attachment!
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>
>> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>


More information about the Lowfer mailing list