[Lowfer] MP

Mitch Powell ve3ot.mp at gmail.com
Thu Jan 28 15:26:31 EST 2016


Hi John et al:
Thanks for listening - but the last of my FETs just smoked !
This conversion to 475 kHz has been a nightmare - modifying all filters,
toroids, and antenna systems.
Each change was reflected by new problems, and they kept cascading down the
line.
As I sat here this morning - I detected a familiar electrical odor - hot
and definitely bad....by lucky chance (?) I was sitting right beside the
transmitter as it arced and spit before swallowing my last FET in stock.

So your efforts to hear me much appreciated but - I was moving a couple of
fans in the room and opening a window !

I will initially be off the air for some time - so may enjoy some listening
and experience some of the receiving that I have not been able to do for
some time. Maybe a total re-building is in the future. The G0MRF rig worked
well for over a decade..... I guess it just really didn't want to move to
an unfamiliar place - 475 kHz.

73

Mitch

On Thu, Jan 28, 2016 at 9:50 AM, JD <listread at lwca.org> wrote:

> I wasn't sure if MP was back on. There was no trace here yesterday during
> the daytime, nor about an hour after sunset.
>
> However, I was getting WSPRs from all corners of the U.S. on 630m from
> about
> an hour before sunset to an hour after, when I packed up to go home.
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>


More information about the Lowfer mailing list