[Lowfer] WD2XES 2 Watt WOLF

[John Andrews]

Bill,

Interesting to get a decode with an SNR that bad. Decodes usually start 
around q: -3. Nifty!

John, W1TAG

On 1/7/2016 4:29 PM, Bill de Carle wrote:
> Just for fun, I started early.  I am using the loops tonight :-)
> Bill VE2IQ
> 2016-01-07 21:15:37 >WOLF10  -r 7800.00223 -f 799.969 -t 0.5 -d 3 -w 0.0000
> t:  24 f: 0.235 a: 1.4 dp: 65.9 ci: 8 cj:337 ???NMN9P/CK4UYD ?
> t:  48 f:-0.325 a: 0.6 dp: 63.3 ci: 9 cj:462 K8RBE6JV9B0.NQ* ?
> t:  96 f: 0.048 a: 1.1 dp: 77.4 ci: 9 cj:294 ZDWLM0H/H5CW 56 -
> t: 192 f: 0.312 pm:6.500 jm:586 q:-14.7 -7.0 1XPA./SOYUM/Y3  -
> t: 288 f:-0.459 pm:7.905 jm:447 q:-12.4 -6.3 /JDO2TI/ZIWV6EL -
> t: 384 f: 0.000 pm:12.79 jm:134 q: -6.1 -4.9 WD2XES 2W WOLF  -
>
> At 03:08 PM 1/7/2016, John wrote:
>> Given that the TA path is pretty rough right now, and most of the
>> WD2XES WOLF reports have been coming from the eastern US and Canada,
>> I'm going to run a bit more QRP tonight, with 2 watts transmitter
>> output (instead of last night's 300), again on 137.350 kHz.
>>
>> Reports are welcome.
>>
>> John, W1TAG
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>