[Lowfer] WOLF

[John Andrews]

J.B.,

I will be doing some WOLF work on 137.350 kHz, once I sort out some 
computer problems. Maybe tonight.

I'd caution against dropping WOLF signals in the middle of the WSPR 
segment of either band. WOLF is much wider than WSPR, and there's no 
sense in clobbering very popular WSPR signals.

John, W1TAG

On 1/5/2016 12:28 PM, John Bruce McCreath wrote:
> I see, after reading through my backlog of Xmas & NY e-mails, that I missed out on some WOLF activity.
> Tiring of the same-old Navtex, WSPR and QRSS modes lately, I've decided to give the mode another try
> and see what it would do on 630M.  Taking a cue from Andy, G4JNT, I've set it up for 474.200 dial, with
> an audio centre frequency of 1,500 Hz.  I'll run this setup from now through the coming weekend in case
> anyone wants to put out a "wolf howl" on MF.
>
> 73, J.B., VE3EAR
>
> LowFER Beacon "EAR"
> 188.830 kHz. QRSS30
> EN93dr
>
>
>
>
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>