[Lowfer] TAG in CT

[John Andrews]

JR,

Spent $30 each for two of those ovens. One is in the TAG Lowfer rig, the 
other in the RY Hifer rig. Vectrons, if memory serves. I believe that 
they came from some late-80's HP test gear. They do get shut down over 
the summer, contrary to the conventional wisdom that high accuracy 
crystals should be run continuously. But within a couple of hours, they 
are right back on the mark, at least for these purposes.

Anyway, thanks for the check. Off to SKN!

JA

On 12/31/2016 6:49 PM, jrusgrove at comcast.net wrote:
> JA
>
> New system finally cal'ed. TAG currently within 10 uHz of .297. Very nice indeed!
>
> http://www.w1vd.com/grabber.html
>
> Jay W1VD   WD2XNS  WE2XGR/2
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>