[Lowfer] Lowfers

[Mitch Powell]

Hi Garry: All measurements solid here - so not sure what happened earlier.
Here is a copy of the reason for QRSS3.
Thanks for the report - nice to see it that clearly.

quote"Good day John, Garry and JD - Not much of a chance of slipping in a
change on you.

Had presented a talk on LF at the local Radio Club on Thursday/Oct8 - and
had switched over to full ID at QRSS3, before I left for the meeting.  It
was obviously noted pretty quickly - congratulations. Talked about software
of course, and QRSS operation - so set up this speed with ID to provide the
display you have received.

I thought that if I could get them listening down at 137, hearing QRSS3
directly, that they could then install software, and start listening on or
about 500 kHz with additional modes that are available there on a more
regular basis.
NDBs were covered for further listening tests by the novice.

I hope it works, and generates some LF interest and possible activity in
the area.
Good crowd of 50, so the odds are that one or more should hop on the
bandwagon.

Returning to QRSS60 tonight - but interesting to see the effect QRSS3, as
noted.

Thanks all for reports.

Mitch

On Tue, Oct 13, 2015 at 12:18 PM, Garry Hess <k3siw at sbcglobal.net> wrote:

> J.B., don't know why Mitch was sending "VE3OT" via QRSS3 for a few days,
> but he's back on the air now with "MP", QRSS60 as before.
>
> --
> 73, Garry, K3SIW, EN52ta, Elgin, IL
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>