[Lowfer] 137 kHz with 20dB pad

[Michael Sapp]

Garry & All:  I had to change to QRSS30 to get clean dit-dah breaks. With a 
20dB pad in front of my converter preamp

a 40/40 visual settings work well....

https://www.dropbox.com/s/it42xctni2vvber/capt00044.jpg?dl=0

73, Mike wa3tts



----- Original Message ----- 
From: "Garry" <k3siw at sbcglobal.net>
To: "lowfer list" <lowfer at mailman.qth.net>
Sent: Tuesday, March 17, 2015 8:43 AM
Subject: Re: [Lowfer] 137 kHz


> Mike, to say welding goggles are needed might be an understatement, hi.
> I dropped the ARGO sensitivity and contrast so I could get a decdent
> waterfall of the activity.XEB was very close to XKO in frequency but
> once overload was removed they were both distinct.
>
> XKO has been going strong since the evening of 3/15. It's now the
> morning of 3/17 and copy in between has been 100%.
> -- 
> Garry, K3SIW, EN52ta, Elgin, IL
>


--------------------------------------------------------------------------------


> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>