[Lowfer] E-Loran

[Steve]

Interesting John. This is something a little different than the old system 
then. The calibration lines were very helpful.

Steve / 73


> Steve,
>
> Further to my post of yesterday...
>
> The local interference stopped this afternoon, and the E-Loran signal was 
> on the air, so I did some exploring. Either the E-Loran signal structure 
> is much narrower BW than Loran-C, or their present antenna setup is 
> throttling it. Working out from 100 kHz, I could see very clear lines up 
> to about 112 kHz, fainter lines at 113 kHz, and nil at 114 kHz. So, this 
> present setup won't produce "visible" lines in the 2200 meter band at 400 
> miles.
>
> John, W1TAG
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


WEB - "The VE7SL Radio Notebook":  http://members.shaw.ca/ve7sl

VE7SL BLOG - "Homebrewing and Operating Adventures From 2200m to Nanowaves": 
http://ve7sl.blogspot.ca/