[Lowfer] WH2XHA QRSs3 Beacon

[jrusgrove at comcast.net]

Frank

Clearly audible ... would be an easy high speed cw QSO ... peaking 35 dB s/n in 366 mHz bandwidth. 
Frequency 400.2 Hz high when I looked a few minutes ago (receiver / sound card GPS disciplined - 
accuracy about 10 uHz).

Will leave the grabber up for a bit ... http://www.w1vd.com/grabber.html .

Jay W1VD  WD2XNS  WE2XGR/2

----- Original Message ----- 
From: "Michael Sapp" <wa3tts at verizon.net>
To: "Discussion of the Lowfer (US, European, & UK) and MedFer bands" <lowfer at mailman.qth.net>
Sent: Monday, February 16, 2015 5:31 PM
Subject: Re: [Lowfer] WH2XHA QRSs3 Beacon


> OK Frank, I will take a listen and capture a few frames for you. Just added another filter choke 
> to my LO driver amp B+ line, so some interest here in seeing how the converter responds to
>
> the change.  Oh, I just noticed you joined the list !!!
>
> Mike wa3tts
>
>
> ----- Original Message ----- 
> From: "Frank Lotito" <k3dz at live.com>
> To: <lowfer at mailman.qth.net>
> Sent: Monday, February 16, 2015 4:35 PM
> Subject: [Lowfer] WH2XHA QRSs3 Beacon
>
>
>> Today, Feb 16, 2015 around around sunset (Pittsburgh,PA) I expect to start QRSs3 transmission 
>> around 476.7 KHz. My QRSs3 transmission is my Part 5 call sign with grid locator. To save time, 
>> the zeros in my grid locator are sent as the letter "O." Your reports, including screen shots 
>> will be appreciated via my e-mail K3DZ at LIVE.comI expect to be using QRSs3 for the next few 
>> days, starting before sunset in Pittsburgh, PA. I will turn off my beacon around 10 PM local 
>> time. I am not GPS disciplined, nor am I using an oven controlled crystal oscillator. Frequency 
>> drift reports will be appreciated, as well as reports on spurs,key clicks,power supply hum, etc. 
>> around my carrier frequency. 73 Frank K3DZ / WH2XHA
>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html