[Lowfer] WSPR decodes so far

[Lloyd Chastant]

Bill here is my decoder from wsjt-x ver1.60 with wspr2


2056  -30  -0.2    0.137430    0   WD2XES        FN42     30    604

2104  -30  -0.1    0.137430    0   WD2XES        FN42     30    604

2112  -29  -0.0    0.137430    0   WD2XES        FN42     30    604

2116  -29  -0.3    0.137430    0   WD2XES        FN42     30    604

Lloyd W3NF

On Sun, Dec 13, 2015 at 8:28 PM, Bill de Carle <ve2iq at magma.ca> wrote:

> Hi John:
>
> WD2XES on LF 137.430 Khz 2015.12.13 using WSJTX decoder (not 20M)
> 1940  -26   0.2   14.097030   -1   WD2XES        FN42     30    598
> 1948  -20   0.0   14.097030   -1   WD2XES        FN42     30    598
> 1952  -21   0.1   14.097030    1   WD2XES        FN42     30    598
> 1956  -24   0.0   14.097030    1   WD2XES        FN42     30    598
> 2000  -21   0.1   14.097030   -1   WD2XES        FN42     30    598
>
> And here is the output from WXPRX decoder right afterwards...
>
> 2006  -21   0.0    0.137430    0   WD2XES        FN42     30
> 2010  -22   0.0    0.137430    0   WD2XES        FN42     30
> 2014  -21  -0.0    0.137430    0   WD2XES        FN42     30
>
> Considering there is local noise coming and going, I'd say there is no
> real difference.
> Perhaps the WSJTX decoder would do better on weaker signals?
>
> Bill VE2IQ
>
> At 01:38 PM 12/13/2015, you wrote:
>
> It might be interesting if some of you could compare what you've been
>> getting with my WSPR-15 signal with the upcoming WSPR-2 signal.
>>
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>