[Lowfer] WD2XES Daytime WSPR15

[Douglas Williams]

XES SNR went from -31 to -19 dB in one decode as soon as darkness arrived.

On Fri, Dec 11, 2015 at 5:25 PM, Douglas Williams <
williamsdoug1966 at gmail.com> wrote:

> Getting decodes with the new receiver and windows 10.
>
> On Fri, Dec 11, 2015 at 5:00 PM, Michael Sapp <wa3tts at verizon.net> wrote:
>
>> Tnx info Lloyd, makes me even more leery of Win 10....
>>
>> Mike tts
>>
>> ----- Original Message ----- From: "Lloyd Chastant" <lloydc6 at gmail.com>
>> To: "Discussion of the Lowfer (US, European, & UK) and MedFer bands" <
>> lowfer at mailman.qth.net>
>> Sent: Friday, December 11, 2015 4:49 PM
>>
>> Subject: Re: [Lowfer] WD2XES Daytime WSPR15
>>
>>
>> Ok mike did a restart will see how goes..I'm not really too fond of win 10
>>> need WIN 7 Back...
>>> Lloyd
>>>
>>> On Fri, Dec 11, 2015 at 9:07 PM, Michael Sapp <wa3tts at verizon.net>
>>> wrote:
>>>
>>> Llord: Try a PC restart. In the past I have had trouble with certain
>>>> decodes when the jitter numbers where high on the Meinburg timing
>>>> software.
>>>> A restart usually clears that issue up....
>>>>
>>>> 73 Mike wa3tts
>>>>
>>>> ----- Original Message ----- From: "Lloyd Chastant" <lloydc6 at gmail.com>
>>>> To: "Discussion of the Lowfer (US, European, & UK) and MedFer bands" <
>>>> lowfer at mailman.qth.net>
>>>> Sent: Friday, December 11, 2015 3:54 PM
>>>> Subject: Re: [Lowfer] WD2XES Daytime WSPR15
>>>>
>>>>
>>>> Same hr..I am running win10 and wsprx v0.8 r3058 am trying win10 in
>>>>
>>>>> compatabilty ver7 now..but  i still just get xrr decodes only..Is there
>>>>> any
>>>>> other wsprx 15 program ??Aw well keep a trying:-)
>>>>> Lloyd
>>>>>
>>>>> On Fri, Dec 11, 2015 at 7:59 PM, John Andrews <w1tag at charter.net>
>>>>> wrote:
>>>>>
>>>>> Lloyd,
>>>>>
>>>>>>
>>>>>> Not sure why. Just checked the clock at this end, and it's dead on. Do
>>>>>> you
>>>>>> have any obvious interference on the waterfall? Running normal power
>>>>>> here
>>>>>> this afternoon, and others are getting good decodes. Your decodes of
>>>>>> XRR
>>>>>> seem OK. Dunno!
>>>>>>
>>>>>> John, W1TAG
>>>>>>
>>>>>> On 12/11/2015 2:30 PM, Lloyd Chastant wrote:
>>>>>>
>>>>>> John i keep getting XRR decodes but  no decodes on XES..which seems to
>>>>>>
>>>>>>> have
>>>>>>> a nice signal.any suggestions
>>>>>>> Lloyd W3NF
>>>>>>>
>>>>>>> ______________________________________________________________
>>>>>>>
>>>>>> Lowfer mailing list
>>>>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>>> Post: mailto:Lowfer at mailman.qth.net
>>>>>> Post must be less than 50KB total for message plus attachment!
>>>>>>
>>>>>> This list hosted by: http://www.qsl.net
>>>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>>>
>>>>>> ______________________________________________________________
>>>>>>
>>>>> Lowfer mailing list
>>>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>> Post: mailto:Lowfer at mailman.qth.net
>>>>> Post must be less than 50KB total for message plus attachment!
>>>>>
>>>>> This list hosted by: http://www.qsl.net
>>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>>
>>>>>
>>>> ______________________________________________________________
>>>> Lowfer mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Lowfer at mailman.qth.net
>>>> Post must be less than 50KB total for message plus attachment!
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>
>>>> ______________________________________________________________
>>> Lowfer mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Lowfer at mailman.qth.net
>>> Post must be less than 50KB total for message plus attachment!
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>
>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
>