[Lowfer] WD2XES Daytime WSPR15

[John Andrews]

Doug,

Sorry, I was running errands...

Set your dial to 136.000. With WSPR-X set for WSPR-15, it will look in 
the correct 137.600 - 137.625 segment.

John, W1TAG

On 12/11/2015 9:53 AM, Douglas Williams wrote:
> I'll monitor for your signal today, John. What would be the optimal
> receiver dial setting? 136.100?
>
> On Fri, Dec 11, 2015 at 9:33 AM, John Andrews <w1tag at charter.net> wrote:
>
>> WD2XES will attempt to run WSPR15 during the day today on 137.620 kHz, at
>> :00 and :30 each hour. Not running full power, as I won't be able to watch
>> it closely. If nothing goes wrong, I will continue into the evening.
>>
>> John, W1TAG/WD2XES
>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>