[Lowfer] XSV and MFSK16 again tonight

[Neil Klagge]

Hi JB. Thanks for your reply.

If you watch the two parallel lines of ur cursor on the waterfall, try to
keep the signal exactly between the lines. If it does start to decode, then
turn off the AFC so that it will stay put. You might still have to tweak
that position from time to time. It depends on how weak it is.

Hope you at least see some multiple frequency marks dancing around  within
about 150 hz of each other.

I might try MFSK8 in another day or two. It is slower but narrower and
should have about a 2 or 3 dB advantage over 16.

I normally just post on the 600m reflector cuz I dont want to bother the LF
guys with my 630m stuff. But I am finding that there are those on this list
that want to know.

Thanks for all your efforts, JB.
73, and good luck
Neil XSV

w0yse, Layton Utah


On Sat, Mar 22, 2014 at 5:17 PM, John Bruce McCreath
<weazle at hurontel.on.ca>wrote:

> Hi Neil....up and running with MultiPSK set for 850 Hz., which I hope is
> right....dial is 474.200 kHz.
> I've never used that particular mode before, so it'll be fun to see if I
> can snag a copy of your sig.
>
> 73, J.B., VE3EAR
>
> LowFER Beacon "EAR"
> 188.830 kHz. QRSS30
> EN93dr
>
>
>
>
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>