[Lowfer] 29.501 QRSS30 today

[jrusgrove at comcast.net]

Dex

What's the transformer turns ratio? Any idea what the inductance of the loading coil is ... or how 
much L was required on 137 or 500 kHz if using the same antenna? Antenna current? Inquiring minds 
want to know.

Just fired up SpecLab http://www.w1vd.com/grabber.html hoping to catch a glimpse. Any chance for 
QRSS60 instead of 30?

Jay




----- Original Message ----- 
From: "Dexter McIntyre W4DEX" <dexter.mc at gmail.com>
To: "Discussion of the Lowfer (US, European, &amp;UK) and MedFer bands" <lowfer at mailman.qth.net>
Sent: Saturday, March 15, 2014 10:34 AM
Subject: [Lowfer] 29.501 QRSS30 today


> Jay's suggestion about the matching transformer windings increased the antenna current from .4 to 
> .6 amps.  I suspect this is about as much as can be expected considering the several thousand feet 
> of 22 gauge hook up wire wound on three plastic buckets plus the old variometer. Will be sending 
> QRSS30 on 29.501 kHz until further notice.
>
> Dex
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html