[Lowfer] OPERA freqs for Thursday night...

[Andy - KU4XR]

Garry: Can you send me the .usr details to get opds-64 going ?? 
I don't have that file.. only 8, and 32 .. If you can, and will, I'll be
grateful to you.. Thanks and 73 :

Andy - KU4XR
--------------------------------------------
On Tue, 3/4/14, Garry Hess <k3siw at sbcglobal.net> wrote:

 Subject: Re: [Lowfer] OPERA freqs for Thursday night...
 To: "lowfer list" <lowfer at mailman.qth.net>
 Date: Tuesday, March 4, 2014, 9:24 PM
 
 Bob, I'm making trial runs of opds64
 and have added "wh2xba fn12lq" to the callsloc.txt file.
 Hopefully that's all that's needed for detection. I see your
 signal peak on the FFT, which is much narrower than the one
 used for 74 and 136 kHz, per Stefan's guidance. But it's
 wide enough to cover 29.501 kHz if Dex cares to transmit. If
 I can keep the microwave oven and furnace blower off
 detection should work!
 
 Operation is straightforward on my Windows XP machine, but
 the opds executable is not compatible with Windows 7 so on
 that machine I have to run it inside a virtual XP window.
 -- 73, Garry, K3SIW, EN52ta, Elgin, IL
 ______________________________________________________________
 Lowfer mailing list
 Home: http://mailman.qth.net/mailman/listinfo/lowfer
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Lowfer at mailman.qth.net
 Post must be less than 50KB total for message plus
 attachment!
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html