[Lowfer] XBA/1 tonite in EN90xn

[Michael Sapp]

Tnx Bob, better VLF converter planned as a project before next fall....

73  Mike wa3tts


----- Original Message ----- 
From: "Bob Raide" <rjraide at hotmail.com>
To: "Bob Raide" <lowfer at mailman.qth.net>
Sent: Saturday, March 01, 2014 11:46 PM
Subject: Re: [Lowfer] XBA/1 tonite in EN90xn


> Mike;
> When things warm up a bit and the furnace can be given a break you will 
> have some nice captures to show off! 73 keep up the good work-Bob
>
>> From: wa3tts at verizon.net
>> To: lowfer at mailman.qth.net
>> Date: Sat, 1 Mar 2014 23:25:09 -0500
>> Subject: [Lowfer] XBA/1 tonite in EN90xn
>>
>> Bob & All: Less thermal drift tonite from more moderate wx temperatures 
>> here, although the furnace cycling still evident @ .1~.2 Hz or so.
>>
>> The extra VLF common mode choke on the SW transformer feed line of the 
>> EWE made a noticeable improvement.
>>
>> http://i1296.photobucket.com/albums/ag19/wa3tts/xba1m114_zps1b35a69f.jpg
>>
>> Looking forward to attempting an XBA/4 capture on 45555 when Dex is QRV, 
>> noise is lower there as well.
>>
>> 73, Mike wa3tts
>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html