[Lowfer] [600MRG] True Confessions....
Michael Sapp
wa3tts at verizon.net
Tue Jan 28 10:11:54 EST 2014
Eric: Thanks, I've been waiting to see what level you captured XSV with your
phased beverages, given that my small lot rx antenna hears 8 to 10 dB down
from your setup.....
Looks like I may have to wait for a WSPR15 run to hear XSV at his current
ERP level.....73, Mike wa3tts
----- Original Message -----
From: "Eric NO3M" <no3m at no3m.net>
To: "Neil Klagge" <w0yse.7 at gmail.com>; <600mrg at w7ekb.com>; "lowfer group"
<lowfer at mailman.qth.net>
Sent: Tuesday, January 28, 2014 3:43 AM
Subject: Re: [Lowfer] [600MRG] True Confessions....
> Decided to point West around 0830Z, got a surprise decode:
>
> 2014-01-28 08:36 WG2XSV 0.475740 -26 0 DN41ac 0.2
> WG2XJM EN91wr 2640 78
>
> First time getting XSV on WSPR-2, hopefully catch a few more. Quiet night
> and prop seems good.
>
> 73 Eric NO3M / WG2XJM
>
> On 01/27/2014 12:55 PM, Neil Klagge wrote:
>> Gang:
>>
>> I have a confession to make.
>>
>>
>> Prior to adding
>> the
>> 60 ft top wire to my 630m vertical, I had verified that my INSIDE
>> antenna
>> current measurements were matching my OUTSIDE measurements (at the base
>> of
>> the vertical, above the variometer). When I added the top loading wire I
>> assumed the inside RF current measurement were still matching the outside
>> (actual) antenna current.
>>
>>
>> This morning I decided to take the RF ammeter back outside to re-verify
>> that fact but, to my surprise, it was about 1.46 times as much current as
>> I
>> thought.
>>
>> Thus, since last Tuesday, when I added that top load wire, my power has
>> NOT
>> been 100mW ERP, but rather about 200mW ERP. Thus all my 100mW reports
>> were
>> incorrect.
>> So, I guess that I have increased my power by 6 dB, rather than the 3
>> dB
>> I was thinking earlier.
>>
>>
>> Ok, now I feel better. Thank you for your time.
>>
>>
>> 73, Neil Klagge, wg2xsv
>> DN41ac
>>
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the Lowfer
mailing list