[Lowfer] WG2XLP. 137.775 kHz

[Douglas D. Williams]

Coming in strong here. I'll post a pic later.


On Fri, Jan 10, 2014 at 3:43 PM, Pat Bunn <pbunn at matrixei.com> wrote:

> Doug
>
> QRSS60
>
> Pat
>
> Sent from my iPhone
>
> On Jan 10, 2014, at 3:19 PM, "Douglas D. Williams" <kb4oer at gmail.com>
> wrote:
>
> > Hi Pat. I just got home from work. What mode you running?
> >
> >
> > On Fri, Jan 10, 2014 at 3:12 PM, Pat Bunn <pbunn at matrixei.com> wrote:
> >
> >> Thank Mitch
> >>
> >> I ran about 200 watts for about 24 hours and now am running right at 500
> >> watts. Hopefully I won't be replacing FETs later today.
> >>
> >> Pat
> >> WG2XLO
> >>
> >> Sent from my iPhone
> >>
> >> On Jan 10, 2014, at 11:49 AM, Mitch Powell <mitch.powell at sympatico.ca>
> >> wrote:
> >>
> >>> Pat:
> >>> Very stable signal - and that is about the power range I have been
> >> running - usually 200-250 watts. It is the G0MRF rig - and I have
> pushed it
> >> to 400 watts - but had to add an mini-fan on the "tank" coil. I'm using
> a
> >> 340 ft loop - top at about 60 feet. So power and antenna stays constant
> -
> >> and I think it  provides a reasonably stable signal for propagation and
> >> seasonal variations to be checked by observers.
> >>> Good luck with the 500 watts - and will look forward to listening for
> >> you later.
> >>> 73
> >>> Mitch
> >>> On 2014-01-10, at 11:26 AM, pbunn wrote:
> >>>
> >>>> Mitch,
> >>>>
> >>>> Thanks for the report. I was using a new Class d transmitter rated at
> >> 500 watts but running 200 watts. I am trying out some new FETs and
> didn't
> >> want to push them. So far the transmitter is very efficient. Looks like
> the
> >> antenna is working. Next is an attempt at 74 kHz.
> >>>>
> >>>> Thanks
> >>>>
> >>>> Pat
> >>>
> >>> ______________________________________________________________
> >>> Lowfer mailing list
> >>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> >>> Help: http://mailman.qth.net/mmfaq.htm
> >>> Post: mailto:Lowfer at mailman.qth.net
> >>> Post must be less than 50KB total for message plus attachment!
> >>>
> >>> This list hosted by: http://www.qsl.net
> >>> Please help support this email list: http://www.qsl.net/donate.html
> >> ______________________________________________________________
> >> Lowfer mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Lowfer at mailman.qth.net
> >> Post must be less than 50KB total for message plus attachment!
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> > ______________________________________________________________
> > Lowfer mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/lowfer
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Lowfer at mailman.qth.net
> > Post must be less than 50KB total for message plus attachment!
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>