[Lowfer] WG2XLP. 137.775 kHz

[Michael Sapp]

You are welcome Pat. I'll have a capture with a few furnace cycle humps in 
it in awhile. Jay seems to be hearing you a bit better at distance for 
evening skywave....

Mike wa3tts

----- Original Message ----- 
From: "Pat Bunn" <pbunn at matrixei.com>
To: "Discussion of the Lowfer (US, European, &amp; UK) and MedFer bands" 
<lowfer at mailman.qth.net>
Sent: Thursday, January 09, 2014 9:23 PM
Subject: Re: [Lowfer] WG2XLP. 137.775 kHz


> Thanks for the report Mike. I am running a Class D transmitter at about 
> 200 watts. Antenna is a 55 foot top loaded vertical with a 3.3 mH loading 
> coil and a approx. 400 uH variometer with a matching transformer per W1VDs 
> website.
>
> Pat
> N4LTA
> WG2XCT
> WG2XLP
>
> Sent from my iPhone
>
> On Jan 9, 2014, at 8:12 PM, Michael Sapp <wa3tts at verizon.net> wrote:
>
>> Pat: Peaking -49 in ARGO QRSS60 slow at 137.775 in EN90xn. Background 
>> noise peaking around -62, floor around -80.
>>
>> Mike wa3tts
>>
>>
>> ----- Original Message ----- From: "Pat Bunn" <pbunn at matrixei.com>
>> To: "Discussion of the Lowfer (US, European, &amp; UK) and MedFer bands" 
>> <lowfer at mailman.qth.net>
>> Sent: Thursday, January 09, 2014 7:24 PM
>> Subject: Re: [Lowfer] WG2XLP. 137.775 kHz
>>
>>
>>> I just increased the power to 200 watts and moved the frequency to 
>>> 137.775 to move more into the window.
>>>
>>> Pat
>>> XLP
>>>
>>> Sent from my iPhone
>>>
>>> On Jan 9, 2014, at 7:18 PM, Michael Sapp <wa3tts at verizon.net> wrote:
>>>
>>>> Pat & Mitch: Also listening here. I have one rx setup on wspr-15 for 
>>>> DK7FC and the other on 137.770 QRSS60.  I'm listening on the NE 
>>>> transformer, but the F/B is not that great at 137 so I should here 
>>>> something....
>>>>
>>>> Mike wa3tts
>>>>
>>>> ----- Original Message ----- From: "Mitch Powell" 
>>>> <mitch.powell at sympatico.ca>
>>>> To: "Discussion of the Lowfer (US, European, &amp; UK) and MedFer 
>>>> bands" <lowfer at mailman.qth.net>
>>>> Sent: Thursday, January 09, 2014 6:30 PM
>>>> Subject: Re: [Lowfer] WG2XLP. 137.770 KHz
>>>>
>>>>
>>>>> What mode are you transmitting Pat ? Listening now.
>>>>> Mitch
>>>>> On 2014-01-09, at 5:34 PM, Pat Bunn wrote:
>>>>>
>>>>>> Dex.
>>>>>>
>>>>>> I am testing at 137770 Hz at about 90 watts. Blew a set of fets 
>>>>>> earlier at 250 watts. Current was low so I  expect it was over 
>>>>>> voltage. My antenna is resonant but the matching transformer can do 
>>>>>> no better than 1.3: 1. I am out of the 34N20 fets so I installed a 
>>>>>> set of 30N40 that are a little harder to drive but good for twice the 
>>>>>> voltage. So far so good
>>>>>>
>>>>>> Any reports would be appreciated. My first transmissions with WG2XLP
>>>>>
>>>>> ______________________________________________________________
>>>>> Lowfer mailing list
>>>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>> Post: mailto:Lowfer at mailman.qth.net
>>>>> Post must be less than 50KB total for message plus attachment!
>>>>>
>>>>> This list hosted by: http://www.qsl.net
>>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>
>>>> ______________________________________________________________
>>>> Lowfer mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Lowfer at mailman.qth.net
>>>> Post must be less than 50KB total for message plus attachment!
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>> ______________________________________________________________
>>> Lowfer mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Lowfer at mailman.qth.net
>>> Post must be less than 50KB total for message plus attachment!
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>
>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html