[Lowfer] WG2XLP. 137.770 KHz

[lloyd chastant]

Copy hr
Lloyd W3NF


On Thu, Jan 9, 2014 at 10:34 PM, Pat Bunn <pbunn at matrixei.com> wrote:

> Dex.
>
> I am testing at 137770 Hz at about 90 watts. Blew a set of fets earlier at
> 250 watts. Current was low so I  expect it was over voltage. My antenna is
> resonant but the matching transformer can do no better than 1.3: 1. I am
> out of the 34N20 fets so I installed a set of 30N40 that are a little
> harder to drive but good for twice the voltage. So far so good
>
> Any reports would be appreciated. My first transmissions with WG2XLP
>
> Pat
> WG2XLP
>
> Sent from my iPhone
>
> On Jan 9, 2014, at 5:09 PM, Dexter McIntyre W4DEX <dexter.mc at gmail.com>
> wrote:
>
> > Bob Raide wrote:
> >> WG2XRS/4 [XRS4] and good chance Dex will be back up 1 HZ above my freq
> with big signal out of NC.
> > I may have an antenna problem so if I do xmit again tonight it will
> likely be after 0000Z.  Waiting until after dark may be a clue :)
> >
> > Dex
> > ______________________________________________________________
> > Lowfer mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/lowfer
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Lowfer at mailman.qth.net
> > Post must be less than 50KB total for message plus attachment!
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: xlp.jpg
Type: image/jpeg
Size: 11392 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/lowfer/attachments/20140110/25ec22cd/attachment.jpg>